Lennox Mini Split Error Codes and What They Might Mean

|

Lennox mini split systems are a solid way to provide compact, yet effective temperature control for your home. Some models are built for air conditioning only, while heat pump models can provide both heating and cooling.

But no ductless mini-split is flawless. There’s always a risk your mini-split could malfunction. To find out what is malfunctioning, you should locate where the mini-split error codes are displayed. Understanding what these codes mean can help you kickstart mini split repair, especially if professional help is needed.

What each code means will ultimately depend on the specific model of your mini-split system. You can consult your manual for a guide to what each code means. You can also contact the HVAC pros at Air Houston Mechanical LLC. Our technicians are trained to recognize these codes to deliver prompt mini-split repair in Huffman. Give us a call at (832) 501-3419 to request an appointment.

Common Lennox Mini Split Error Codes

While error codes will differ from model to model, there are some codes you’ll be more likely to encounter. To identify what your error code could mean, consider the following:

  • Is your system a mini split air conditioner or a mini split heat pump?
  • Are there other signs of what is happening? A loud noise comes from a specific component, for example.
    Here are a handful of the more common error codes for Lennox mini splits.

E1 – Indoor / Outdoor Unit Communication

In general, an E1 error code means that communication between the mini-split system’s indoor and outdoor units has been disrupted. It could be experiencing intermittent connection issues or have failed. When the indoor and outdoor units can’t communicate with one another, they will be unable to properly balance indoor temperatures.

E5 – Voltage Protection or Temperature Sensor Error

If you own a mini split heat pump, an E5 error could refer to a problem with the system’s voltage. A repair technician from Air Houston Mechanical LLC may refer to it as overcurrent protection. Both unusually high or low voltage can result in this error code.

For mini split air conditioners, this code can also stand for voltage issues. In other cases, it’s alerting you to a circuit problem with the outdoor temperature sensor.

E6 – Indoor / Outdoor Unit Communication

An E6 error code can also refer to a communication problem between the two units, similar to an E1 code. It may also be a problem with one of the temperature sensors.

P4 – Compressor Drive Error / High Temperature

A P4 error code will most times be concerned with your mini splits compressor system, found within the outdoor unit. When the compressor drive is malfunctioning, the most likely culprit is excessively high temperatures. A high temperature at the discharge line can also trigger a P4 code.

P6 – Compressor Switch Open or Drive Board Failure

Your mini-split system will have computer boards that ensure the indoor and outdoor units can communicate with one another. If the drive board is faulty, a P6 error code is common.

When temperatures exceed safe levels, a safety switch should protect the electrical components of your mini-split system, including any components that control the outdoor compressor. If this switch is open, the P6 code could appear. You may also find the P6 code if the compressor is struggling with high or low-pressure issues.

Check the Manual for Your Specific Model

Don’t forget that in general, error codes are different for each model of a Lennox mini-split system. Your manual will offer a guide for these error codes and what they can mean. But because many of these codes stem from electrical problems, professional experience is typically needed.

Call Air Houston Mechanical LLC for Mini Split Repair

Air Houston Mechanical LLC can provide fast and affordable ductless mini-split repair. Whether you own a mini split AC system or a mini split heat pump, our technicians can quickly identify your specific problem.

For some problems, repairs might not be worth it. But that doesn’t mean the mini-split replacement process has to be stressful. We can provide equally effective mini-split installation in Huffman, bringing your new system online with little to no comfort disruption.

To schedule an appointment, give us a call at (832) 501-3419 today.

The post Lennox Mini Split Error Codes and What They Might Mean appeared first on Air Houston Mechanical LLC.

Categories: